Protect The Chair! Making Waterproof Wheelchair Covers for Swimming (for under £20!)

Swimming is the best excercise when you have pain everywhere, but swimming in a wheelchair can be a pain in the arse (clearly not in the chair, but using the chaur before & after).

So I made myself some covers.

The towel was an important factor here, and I used a Turkish Beach Towel as it’s smooth cotton on one side so it’s not scratchy once it’s dried, but has terry on the other side to make it absorbant.

My 1st job was to cut the edges from the mattress protector. This had two advantages – firstly, it makes it easier to work with, and secondly it has built in elastic which I could use later instead of buying extra!

I measured my seat cushion by placing the lining & towel under my cushion & cutting a square around it, making sure that I’d left enough to go around the sides plus an extra 2 inches so the finished cover would wrap underneath like a fitted sheet.

I also cut tassels off plus 2″ of towel to make ties for the backrest cover. This was another excellent reason for the Turkish Beach towel – the finshed thing with it’s ties looks like I’m ready to go on holiday instead of hospital!

Once I’d cut same shape of mattress cover that I had for the towel, I lined them both up with the towel faced down & cover faced up* and trimmed any edges that were wonky (remember I was measuring around an oddly shaped Jay cushion with crap hands weilding scissors!).

*this is important as you’ll want them to match up when you sew them together.

Next, I placed my seat cushion back on, making sure that it was in the middle of the fabric & cut out squares from each corner. These went to 1cm away from the cushion.

Now I was ready to place the towel & cover with right sides facing in and sew together – it’s important to remember that you only sew the outside edges and don’t sew the corners! Otherwise you can’t turn it right ride out.

Next, I sewed the elastic that I salvaged from the mattress protector onto the straght edges that I’d just sewn (not the corners).

Once the elastic was in, I turned the fabric right way to create what can only be described as a giant showercap! With the right side of the towel together, I sewed corners together.

I’m sure there’s a neater way to do this as you can totally see the seams on the inside, but it’s a functional cover…

Making the back was a similar process. If you have a square back, then it’s identical albeit with no elastic.

If like me, you have a moulded/ fitted back, you’ll need to cut the shape of your back from the towel & mattress protector (this can be the rough shape plus 2 – 3 inches seam allowance). With a moulded back, it’s useful to add elastic at the too & bottom to help the cover “wrap” over.

Once I’d cut out the cover pieces (before sewing them together), I cut the tassled edges into 4 equal lengths then folded over the cut edges of the ties & sew along the edges to keep them from fraying. I attached the ties to back piece by sewing the top two to the inside of the corners and the bottom two in the middle. I then tucked them in as I sewed the seams.

(For a square back, sew the ties to each corner).

And this is the finished cover:

And from side (any reason to take a photo of my wheels!)

And from back – I’ve tied the straps in diagonals because it keeps the back cover more secure.

I promptly tested how well the cover worked with a day at the local pool & bubbles. Not a drop of water on my cusions even after some git sprayed with the shower (joys of tinypants helping me get showered).

Since then, I’ve used the cover weekly for swimming and we’ll be taking it on holiday. It’s doing exactly what I needed it to do and is as simple as chucking in the washing machine, or just hanging up like a towel to dry (just don’t tumble dry as it has plastic backing!!!).

What’s the one product that you resorted to making for your chair?

* This post contains affiliate links. I don’t recommend products unless I genuinely think they’re worth buying. By clicking / purchasing you are heloing me to maintain this site and my professional site over at www.TeachAllAboutIT.school

Advertisements

Dear Fatty

(Yes, I know I shamelessly stole the title)

New (academic) year, new challenges. But this year marks a big one and a massive personal challenge for me. If you’re reading my blog, then you’re probably already know about the fun & games I have with Ehlers Danlos Syndrome – TLDR; it’s shit & cramping my style, but this month marks the 1 year anniversary of fracturing my spine and just over a year since my hearing dropped to unworkable levels. Life went on. But without my beloved racing that was an outlet for lots of rage – but now I’m back! Wonkier, in more pain, and with an extensive arse (the image below is my “thinspiration” – a combo of being stationary & evil painkillers has wrecked my weight).

So, with new work challenges I knew that I needed to build in some head space and get back to racing, but with our club now super popular it would be difficult to have a chair set up for my weird & wonky limbs. I’d saved up a percentage and reached out to The 53 Foundation for support – then after completely forgetting I’d contacted them I got an email telling me that they’d love to help me fund the rest of my chair & to go ahead and order it!

As an able bodied peron, the financial layout for going for a run is as simple as some trainers & leggings – an entry level wheelchair is £625 (professioal chairs start at £3k), so this grant was quite literally a game changer.

With my chair winging it’s way to me, I knew I had to pay this kindness forward and whilst I’ll be racing to raise money for the 53 Fondation soon (I promise!), there is one woman who I can’t ignore for my first race.

That’s me in the lurid pink alongside team mates who made sport fun for the first time ever.

That's me in the lurid pink!

At the end of October, to prove I have properly taken leave of my senses, I’ll be participating in the Great South Run (oh the delicious irony!) in my chair supported by my amazing friend Rachel & Mr Geek. Instead of sponsoring me for a big charity, I would be eternally grateful if you would consider making a donation towards Shona’s powerchair GoFundMe. It breaks my heart that this amazing young woman who dedicates herself to helping others in the bendy community has to resort to crowdfunding to get an appropriate chair, but lots of us have been there.

Training starts in earnest now and I’ll be posting updates on how we’re doing (even if that is elongated whining about how much everything hurts!). I’m not aiming for a PB – because Ive never pushed that far, so it will be a PB! I have no aims for elite sport – I simpy want to finish in as few pieces as possible (and have the following week already set aside for bed rest).

Wish me luck!